How to Fix a "Color Change Timeout" On Your TC Embroidery Machine

PUBLISHED

If you get a "Color Change Timeout" error message on your TC-1501-7S embroidery machine, follow these steps to solve the issue: 

 

To begin, make sure your machine is at 100° by manually rotating the Black Knob on the far right side of the machine. Rotate it 1-2 full times just to be sure.

 

 

Then confirm whether ALL of the take-up levers are the same height.


If one of them is popped down you can pop it back up manually. After this, the issue should go away. 

If one of them is popped up there's a quick adjustment you can make by following the instructions in this video: 

Need Additional Help?

If you are still facing issues with your Ricoma machine, please don't hesitate to reach out to us for further assistance. You can contact us via email at service@ricoma.com or by visiting our support page at www.ricoma.com/US/support.

 

TAGS:
Color change
Need additional help?
Please don’t hesitate to reach out to us for further assistance via email at service@ricoma.com or by visiting our support page at www.ricoma.com/US/support.