The 8-in-1 device is designed to help you embroider on items such as shirt pockets, socks, cap backs, shirt sleeves, collar tips, and more. It is a multi-purpose device set for embroidering on various types of substrates. We recommend this Ricoma product for custom apparel decorators to use on their favorite designs.
If you recently purchased these items but are not sure how to use them...
See below for more information.
- With the 8-in-1 device, there is no need to dismantle garments to stitch on one side anymore. The versatility and broad range of options the 8 sets of hoops provide are endless.
- With using an adhesive backing (stabilizer) and some binder clips, you can personalize any garments.
- With the adhesive side up, place the hoop right way up onto the backing. Remove any excess backing from the outer rim of the hoop.
- Slide the hoop onto the frame (ensuring the adhesive side is facing upwards) and the two holes will lock into place. Tighten the bolt on the frame to secure. Hoop your garment onto the frame and stick to the adhesive. (e.g., If hooping pants, slide hoop down the leg of the pants). Place the frame onto one arm of the machine.
- Choose the "Other" option under the 'Design Set' on your machine to set the correct frame. This enables you to center the frame. Scan your design to ensure the design fits inside the frame allowance and then start your design.
8 sets of hoops that fit into 1 frame:
- 3 x Narrow hoop to fit inside a sleeve cuff or shirt pocket.
- 2 x Square frames for bags, pot holders, etc.
- 2 x Larger narrow frames for the legs of jeans or other pants, an oven mitt or shirt sleeves.
- Rounded hoop perfect for hoodies or the back of a hat/cap.
Need additional help?
Please don’t hesitate to reach out to us for further assistance at service@ricoma.com or visit our support page at www.ricoma.com/US/support.