Heat Press Instructions for Mugs

Please refer to the below instructions for pressing on mugs

1. Print using hard surface premium paper( Glossy side up ) 
2. Do not mirror design (when the print comes out design will be mirrored however upon pressing on the Mug Design will be Shown correctly )
3. Cut Out the Logo and add tape on both sides of the paper, Image has to be facing the Mug.
4. Press into the mug at 300F for 180 seconds
5. Let the Design cool down for 5 minutes - It's ok to peel in the water while Mug is still hot 
6. After peeling in water please be careful to not touch the design as right now the design can be scratched / Damaged 
7. Please bake the mug for 20 minutes at 360F degrees to properly "cook" the design into the mug. Ideally, you will have various of mugs loading in the convection oven at once. 

Hard surface Premium Paper that we recommend: IColor Premium 1 Step Hard Surface Transfer Paper - Letter Size