Please refer to the video below for Connecting your Luminaris 200 (formerly known as the RP 200) to Wi-Fi or Ethernet for the first time:
After you have connected your Luminaris to your network please follow the instructions below:
- Open VividRip.
- Go to File - Select Printer. Click on the 3 dots as shown below:
4. After you click on the 3 dots, click "Add a Printer (IP)"
5. Do NOT type in the IP address, but instead click on the Magnifying glass, and you should see the IP address appear on the list.
6. Please Make sure the computer installed with VividRip is on the same network / WiFi as the Luminaris.
Need Additional Help?
If you are still facing issues with your Ricoma machine, please don't hesitate to reach out to us for further assistance. You can contact us via email at service@ricoma.com or by visiting our support page at www.ricoma.com/US/support.